TS 75 EQ Imp. Plunge Cut Track Saw - 574684

Power and precision in the palm of your hand

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work.

The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
  • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
  • The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
  • Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.

New Product!

  • TS 75 EQ Imp. Plunge Cut Track Saw
  • TS 75 EQ Imp. Plunge Cut Track Saw
  • TS 75 EQ Imp. Plunge Cut Track Saw
  • TS 75 EQ Imp. Plunge Cut Track Saw
  • TS 75 EQ Imp. Plunge Cut Track Saw
$780.00 USD

Features & Benefits.

Power

Power

The TS 75 is our most powerful plunge cut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.

Depth Of Cut

Depth Of Cut

At 2 3/4 inch depth of cut, the TS 75 can power through thick stock with ease.

Slip Clutch

Slip Clutch

The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.

Guide Rail Guidance

Guide Rail Guidance

When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade.

Scribe Line = Cut Line

Scribe Line = Cut Line

The TS 75 makes the actual cut right on the edge of the scribe line, even on bevel cuts.

Riving Knife

Riving Knife

Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback, leaving you in control of the operation.

MMC Electronics

MMC Electronics

Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload.

FastFix Saw Blade Changing System

FastFix Saw Blade Changing System

Blade changes are easier and safer using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal.

See it in action!

Darcy Warner

Watch video of Darcy Warner of Warner Remodeling explaining why the Festool Track Saw is the most important tool in his arsenal and find out why a track saw should be your next tool.

Have a question about this product?

We’re here to help. Feel free to give us a call toll-free at 888-337-8600 or use our contact form and one of our tool application specialists will help answer your questions.

Looking for reviews, opinions or advice?

Visit the Festool Owners Group forum, consisting of over 15,000 international members. The forum is a great place to collaborate with other Festool power tool owners. There's no better online resource of Festool information than the Festool Owners Group.

Festool Owners Group

© Copyright 2017 Festool USA, Tooltechnic Systems, LLC. All rights reserved. Festool reserves the right to correct any erroneous information on this site.